Mounting type of VS1/VS6 series vertical suspended turbine pumps

Standard structure

Ø Suitable for most applications of vertical bobbin pumps;

Ø The position of the suction pipe and the discharge pipe is in the upper part of the mounting base;

Ø Suction pipe and discharge pipe are arranged at 180° to each other;

Ø Can be used as a standard line pump;

Ø Housing only withstands inlet pressure;

Ø The base can be selected as welded or flat according to the installation space and the owner's requirements;

Ø The pump is equipped with a housing drain pipe for easy maintenance.

Tank pump and submersible pump structure

Ø Can be installed on the tank as a standard tank pump;

Ø Can be installed on the intermediate tank as a

booster pump;

Ø Selectable insertion depth for use as a standard

submersible pump;

Ø The position of the discharge pipe can be installed on the upper part of the flange;

Ø No need to install the shell, flexible movement;

Ø The installation flange can be set according to the

owner's requirements;

Ø The minimum opening diameter and minimum liquid level of the tank or intermediate tank are set by the manufacturing plant.

Flange connection

Ø Flange connection structure is adopted according to the installation space requirements;

Ø The location of the discharge pipe is in the upper part of the mounting flange;

Ø The direction of the discharge pipe can be set freely in the horizontal direction;

Ø Suction pipe connection can be selected flange direct connection or container connection;

Ø The installation foundation adopts section steel welded frame or civil foundation;

Ø The installation dimensions are agreed upon by the manufacturer and the owner.

China vertical turbine turbine pump manufacturer provides various stainless steel and duplex steel vertical turbine turbine pumps with affordable prices and stable performance. For more information, please contact 008613974960765.